Many claim that getting a Roomba was the best decision they made but it does come with its host of issues such as the infamous Roomba Error 19. Roomba can certainly be a life safer considering how busy our lives have become but when we are faced issues like this, we need solutions.

A Roomba is a little robotic machine that nips around your house, brushing and vacuuming the floors, carpets, and rugs. The robot has wheels that can spin in opposite directions. This means that the machine will clean any area it can get into. At the same time, this sounds like a nifty device sometimes, your device can run into error codes. 

In this article, we’ll discuss the answer to pressing questions like what is a Roomba error 19 code? Why did it come up, and how can you fix the issue? Lastly, we’ll be talking about how you can test and replace your Roombas battery. 

What is a Roomba Error 19 Code?

roomba button

In the event that something is wrong with your Roomba device, it will speak to you in a two-tone “uh-oh” sound superseded by a series of beeps or a narrated voice. The Roomba error 19 code implies the battery charged for 240 minutes but coordinated out some time recently coming to a full charge. After 240 minutes, the battery times out and stops charging to avoid perpetually drawing electricity and leaving a dent in your finances. You need to understand that there are multiple ways to fix this as well as the other various issues your Roomba can face, some of which we are discussing below.

How Do I Fix My Roomba Error?

Roomba Error 19

There are a couple of ways you can do this. We’ll be discussing the iRobot solution and the other tried and tested solutions. 

iRobot suggests you clean out any obstacles that may be in the way of your Roomba device. Additionally, press clean and put away any hindrances in or near Home Base. 

As we know, the reason for this Roomba error 19 is that the battery discharged to prevent drawing too much electricity. To alleviate this issue, ensure that you just are charging the Roomba device’s battery for 240 minutes and it is properly plugged in.

The next step you must do is check the battery for cracks or any damages. Make absolutely sure that the battery is placed correctly inside its housing. Sometimes, it can move out of its place, which could lead to a Roomba error 19. While you do this, you can also check to see if the batter is in okay condition. 

You can also check to see if the power cord is in working condition. If you find it damaged, know that it can be replaced.  If you’ve checked all of these things and you still have the same issue, there is one more thing you can do. At that point, you’ll have to clean anything the Roomba may have bumped into, particularly things close to the Home Base. Before doing so ensure that the Roomba’s cover is closed and the vacuum is plugged into the wall outlet.

Can You Replace Roomba Battery?

Roomba Error 19

In case you have a Roomba 500– 900 model, changing its battery to resolve the Roomba error 19 code is relatively easy. 

Here is what you’ll need: 

  • A Phillips screwdriver
  • Roomba 
  • A replacement Roomba battery

With these tools, youre ready to replace the battery following these four steps:

Step 1: Open your Roomba by loosening the four bottom screws. Remove the spinning brush and lift the bottom cover

Step 2: Remove the battery by lifting the two tabs. Pull the battery out of its housing. 

Step 3: Install the replacement battery and dropping it in place. 

Step 4: Reassemble everything. 

How Do I Test My Roomba Battery?

Roomba Error 19

If you have opted for the latest version of the Roomba, you’ll find that there is no light to indicate charging. This can make it really difficult to know whether your Roomba is charging correctly. Our experts have found a way around this issue. All you need to do is simply press the Clean button on your device. 

You’ll see the light turn on. Its color will let you know approximately the status of the battery: 

  • Green implies it’s charged fully. 
  • Amber implies the battery is mostly discharged. 
  • Pulsing amber implies the vacuum is charging. 
  • Red implies it’s about discharged. 
  • Flashing red light implies the energy is running out. 

When the light appears the color of orange or pulsing amber, you’ll be able to tell your robot cleaner is charging. But, in the event that you see a strong green on show, the battery is full and your Roomba is to work.

While encountering this Roomba error 19 code at the end of a long workday is frustrating, take comfort in knowing that this error is easy to resolve. We hope you enjoyed our guide on what this issue is, how to resolve it and how to replace your battery. Thus, our guide ends with a little refresher on what different lights on your Roomba mean. 


We hope you found this article helpful. The Roomba is an excellent device to have at your disposal as it can make cleaning super fun. However, like most devices, it comes with its own set of issues. Let us know in the comments below how helpful you found this article to be and if any of the solutions we listed helped you fix our Roomba issue. However, if none of these solutions worked, please get in touch with the customer support guys for more assistance.