Author: Farwah

Is Your Talktalk Mobile Data Not Working: Get Back Online With This Guide
Everything we do on our smartphones nowadays requires the internet. Even though service providers have stood up to the increasing demand for the internet there still can be problems. If you are here, and your TalkTalk mobile data is not working, then don’t worry, we will get you sorted in just a bit.

TalkTalk is one of the leading broadband providers in the United Kingdom. It rose in popularity due to its cheap services compared to service providers like BT and Sky. However, the problem with TalkTalk internet not working is that it can happen suddenly and without warning.

There have been reports of up to 40 hours of no internet in some areas of the UK. Meanwhile, TalkTalk is also infamously known for not providing transparent information about such problems to its customers. Additionally, their customer support has also been a target due to negligence as often reported by customers.

How Do I Enable Mobile Data Settings?

If you just purchased a new TalkTalk SIM, chances are that it’s not automatically activated for data use. Hence, this may be why you cannot use your mobile data. We will give you a step by step explanation on how to install TalkTalk mobile data settings.

Once you insert your new TalkTalk SIM into your device, you will receive a configuration message. If you do not receive the message or accidentally deleted it for some reason, you can have it sent again. To do this:
- Firstly, text “TALK” to 40127.
- After you receive the configuration message, it will prompt an install option. Make sure you have an active Wi-Fi connection.
- Secondly, follow the onscreen instructions until the installation is complete.
- After that, restart your phone.
Your phone is now ready to use mobile data.

If you don’t receive the configuration message for some reason, you can also manually set your mobile data settings. On an Android device:
- Go to the Settings and navigate to Network Settings.
- Select the “Access Point Name” or APN option.
On an iPhone,
- Go to your Settings, then Mobile Data.
- Go to your mobile data options and select Mobile data network.
On these pages, you’ll find an option to configure Mobile Data settings. Enter the following settings there:
- Name: TalkTalk Wap
- APN: mobile.talktalk.co.uk
- Proxy: Not set
- Port: Not set
- Username: Not set
- Password: Not set
- Server: Not set
- MMSC: http://mms.talktalk.co.uk/servlets/mms
- MMS proxy: 212.183.137.12
- MMS port: 8799
- MCC: 234
- MNC: 15
- Authentication type: PAP
- APN type: default
- APN roaming protocol: IPv4
- Enable/disable APN: (Ticked)
This should enable data on your device.

Why Is My Mobile Data On But Not Working?

If you have already configured and installed your TalkTalk Mobile Data settings and it’s not working, there can be several reasons why. It can be pretty frustrating, especially if you’re not able to access necessities like Google Maps for navigation or TikTok, WhatsApp, Facebook etc. for your social needs.

Here are some reasons why your TalkTalk Mobile Data may not be working:
- Bug in Phone
- APN settings
- Data plan
- Airplane mode
- Server issues
- In an out of coverage area
We’ll help you identify and solve the most common ones in the following section.

How Do I Fix My TalkTalk Data Not Working?

Turn Off Airplane Mode

Airplane mode makes your phone utterly inaccessible by wireless means. That includes functionality and services such as SMS, phone, Wi-Fi, Bluetooth, and mobile data. If your airplane plane mode is on or was on recently is can lead to TalkTalk Mobile Data not working.

To find Airplane Mode, go to your Settings. It will generally be in the main menu of your Settings app. Please turn it off, or on and off to reset and refresh its settings.

Reboot Your Device

You may be surprised that the simplest of errors can be solved by just restarting your device. For instance, restarting your device will clear your RAM and bring your device to refreshed state. Hopefully, your device will now restore your TalkTalk Mobile Data.

Check Your TalkTalk Mobile Data Plan

Many users often forget about the end date of their data plan, especially if they are using a monthly or yearly data plan. As they are not used to checking the end dates of their data plan first, they are often left wondering why their mobile data isn’t working. You can basically check this by:
1. Logging in to your TalkTalk account
2. This will generate a One Time Password (OTP)
3. Enter the OTP to the website straightaway
4. Select the “My Account” tab
5. After that, select the “My Packages option”
6. Here you can view your current and expired packages
7. You can check for the end date by clicking the “Package overview” option
Final Thoughts

TalkTalk Mobile Data Plans are generally up and running after the configurations as mentioned above. If you are still facing this problem, contact TalkTalk customer support.

We hope our guide helped fixed your issue of TalkTalk Mobile Data not working. Additionally, we have solutions for issues regarding EE Mobile Data Not Working and Vodafone Mobile Data Not Working here.
September 16, 2021
Fix The WOW Error Code 51900319: Get Back To World Of War Craft Now
Experiencing a WOW Error Code 51900319 while raiding with your party? Does it interrupt the hour-long quest that you and your squad put a lot of effort in? Don’t worry, we bring you all the tools to help get rid of this problem so that you can go back to your dungeon crawling.

WOW is counted amongst the most played Mass Multiplayer Online Role-Playing Game (MMORPG) on the internet. Since its release in 2004 by Blizzard Entertainment, the game has morphed into a phenomenon around the globe.

With over four million players, one can expect various issues to constantly pop up. For example, encountering an error like Error code 5900319 will leave your character immobile. As the game is in real-time, your party members around the world will face the hurdle of having a handicap. You don’t want to see your team lose or your party members have a hard time. Instead, stick with us, so we can get you back into WOW in no time.

What Does WOW Error Code 51900319 Mean?

Very simply put, WOW’s genre is ‘multiplayer’. To run MMORPG and in connecting to any player anywhere in the world, you require the internet. Therefore, you need access to the internet. If there are internet issues present when attempting to play WOW then correspondingly, you’ll likely see the WOW Error Code 51900319 you are facing right now.

According to Blizzard entertainment support,

WOW Error Code 51900319 means you have likely lost your internet connection and have disconnected from the server as a result.

However, multiple players have encountered this error while having a perfectly stable internet connection as well.

Why Do I Keep Getting Disconnected From The Server In WOW?

From what we have gathered, the error can result from both the server and player sides. In a tug of war type action, players blame Blizzard Entertainment when they lose connection citing that they have a stable internet and conversely, stating a problem with WOW’s game engine or server. Likewise, Blizzard Entertainment keeps saying that the error is most likely user-caused and has nothing to do with their game or servers.

We have researched that the connection can be a result of various reasons, that all translate to “You have been disconnected”. WOW has a tightened latency network which means it disconnects immediately at the first moment of data or network loss. This can either result from bad internet, or can also be caused by weak graphic cards or CPUs which can’t take a load of heavy internet and extensive graphics or WOW at the same time.

How Do I Fix WOW Error Code 51900319?

Try out these simple fixes that shouldn’t take you more than a few minutes:

Fix FPS

Due to WOW being a demanding game, especially if you want to run it in higher settings like 4K and 60+ FPS, it requires absolute priority of your GPU and CPU. So, to test it out, we would suggest that you lower the FPS setting down to relieve your GPU and CPU a little bit if you like those big numbers.
1. Click on Esc to open the Main menu
2. Click on System
3. Then click Advanced
4. Go to the background FPS in your video settings.
5. Then set the MAX FPS as 30.
Many players reported that the error code stopped appearing after they reduced the maximum FPS.

Change Disconnection Routine for WOW Error Code 9100319

As we mentioned before WOW’s game engine has a tightened latency network. Even when you have a good internet connection, you tend to ignore or overlook minute moments of connection losses. This isn’t a problem most of the time due to standard latency networks taken into account.

Due to security reasons, Blizzard Entertainment keeps the latency network tight. We can, however, customize this setting to suit our internet.
1. Go to the Settings section
2. Navigate to System.
3. Go to the Network tab
4. Deselect/uncheck the “Optimized Network for Speed.”
Reset User Interface

Alternatively, resetting the user interface can fix a number of problems and errors, including WOW Error Code 51900319. To perform this:
1. Close WOW
2. Remove and uninstall any addon managers so they do not redownload any addons after resetting the user interface.
3. Go to Blizzards Battle.net
4. Click on options, then select “Show in Explorer” or “Reveal in Finder.”
5. Close the Battle.net application
6. Now go to the WOW game folder
7. Rename the Cache folder to CacheOld, Interface folder to InterfaceOld, and WTF folder to WTFOld.
You should see improvements when you relaunch WOW.

Final Thoughts

If you are still disconnected, we recommend contacting Blizzard customer support. We hope our guide fixed your problem of WOW Error Code 51900319.

You can also check out our WoW Error 132 – Fatal Exception guide.
September 14, 2021
How To Fix The COD Modern Warzone Dev Error Code 6068
While playing Call of Duty: Modern Warzone, do you often encounter the Dev Error Code 6068? Does it always happen when you’re trying to clutch for your team or crash when you just drop in? Don’t worry, we’re here to help you sort out this mess so you can get back into action in no time.

Call of Duty has been one of the most influential FPS franchises since the early days of gamers playing online. Many of us fondly remember the Xbox lobbies being constantly filled and having fun all night long with our squad.

COD Modern Warzone is the newest release in the Call of Duty franchise. Released in 2020, it quickly rose in popularity due to its insane gameplay and realistic graphics. It soon became one of the most streamed games on platforms like YouTube and Twitch. But having such high-end gameplay and graphics on your PC or console comes at a cost.

What is Warzone Dev Error Code 6068?

You most probably would receive a Warzone Dev Error Code 6068 when running outdated gaming drivers. This error also occurs with issues in your graphics settings. Any occurring problems related to graphics will eventually be prompted as Warzone Dev Error Code 6068. As you already know, Warzone is a very graphics-heavy game; hence such errors are widespread among players.

What causes Warzone Dev Error Code 6068?

There are several reasons why you would receive a Warzone Dev Error Code 6068. Many players have encountered this error mainly due to the wrong graphics settings. Not having minimum requirements such as processing power and VRAM is also a common root of the error.

Having the latest graphics cards is increasingly growing more and more important for players. Online high-res games are usually optimized for best performance on their highest settings. These are only achievable on very new and expensive graphic cards. Nowadays sadly, graphic cards are in short supply. Crypto is taking over the hardware market, and many gamers are left stranded without a stable graphic card. This is due to Crypto Mining also being heavily reliant on graphic cards.

With such shortages, many players are below the threshold for a demanding and unoptimized game like Call of Duty Modern Warzone. Nevertheless, people still put all their heart into the game even when it’s not feasible to have the best Call of Duty experience possible.

Reasons for Warzone Error Code 6068

Below are some of the common reasons, the Warzone error Code 6068 appears:
- Outdated graphic drivers
- Outdated Windows OS
- Random software bugs
- Damaged game files
- Incorrect graphic settings
- Unsupported or below threshold graphic card or processor
In this guide, we go through the most common factors and tried to deduce what is causing the Warzone Dev Error Code 6068 to show up. The following section is a step-by-step tutorial on how to fix Warzone Dev Error Code 6068.

How to get rid of Warzone Dev Error Code 6068?

Update Windows

Keeping all your software updated is the best way to prevent unwanted errors. This is especially true if your Windows OS isn’t updated. Call of Duty Modern Warfare is updated in regards to the latest Windows Update. Updating Call of Duty Modern Warzone is mandatory when you want to play online, so its assumed that you are on the newest update. However, you can go months without updating Windows as there are no significant prompts on installing it. It is best to keep your Windows OS constantly updated.

To check for Window’s updates,
1. Go to the settings app.
2. Select update and security.
3. If you see a pending update, go ahead and download it.
4. Install the update.
Update graphic drivers

Drivers are software components that let the operating system and hardware device communicate and share control. A graphic driver is the software that controls the output of the graphics card of your computer.

Warzone Dev Error is based on graphic issues, so updating your graphic drivers wouldn’t hurt, especially if they are outdated or incompatible. Before you go and download any extra programs to update drivers “easily”, we’ll help you update them right from your control panel.
1. Press and hold win+r keys to open Run.
2. Write “devmgmt.msc” and press Enter.
3. Search for display adapters and select it, this will show your graphics card(s).
4. Right-click the graphics card your Call of Duty Warzone uses and select Properties from the pop-up menu.
5. Select the Drivers tab, then confirm the “Update Drivers” option.
6. Windows will prompt you on how to update. Select “Search automatically for updated drivers.”
7. Windows will now download and update drivers for you.
8. After installation, restart your PC
9. After booting up again, start up Call of Duty Modern Warzone.
Use DirectX 11.0

There have been many reports of various bugs on DirectX 12. This has led to many users switching over to the previous version, DirectX 11.

DirectX is a collection of components, programs, and software needed to run most gaming, multimedia, and rendering applications. DirectX is required because of the ambiguity of the hardware that the user will use. Unlike consoles that have set components, a PC user can have millions of different combinations of hardware. This would make it impossible for a game developer or programmer to design a well-optimized game. DirectX enables programmers and developers to bypass such issues and can create games for a wide variety of systems.

Here is what you need to do to run Call of Duty Modern Warfare using DirectX 11.0.
1. Run the Battle.net launcher.
2. Click on the Blizzards logo drop-down menu.
3. Select Settings.
4. Navigate to Game Settings in the new menu.
5. Check the “Additional command-line arguments” option under Call of Duty Modern Warfare.
6. Enter “-d3d11” in the box that appears.
7. Save then relaunch the game.
Final Thoughts

After trying all the above mentioned solutions, if your issue still remains unresolved, get in touch with Activision Customer Support. We hope our guide helped fix your Warzone Dev Error Code 6068. We have solutions for Warzone Error Code 2048 , Dev Error Code 6034 and Call of Duty Error Code 664640 here too. Check them out too.
September 14, 2021
Insignia Fire TV Not Connecting To Wi-Fi: Simple Step By Step Fix Guide
Is your Insignia Fire TV not connecting to Wi-Fi? Are you stuck dealing with a petty issue when you would rather enjoy your time off? You don’t have to dwell on this for long since we’re here to help you solve this issue effortlessly.

Amazon launched the Fire Stick TV as an all-encompassing device that allowed your everyday and ordinary TV to turn into a smart TV capable of downloading the latest apps without any expensive hardware. This allowed countless people to enjoy YouTube, HBO, and even Amazon’s own Prime Video streaming services.

Best Buy’s LED TV brand, Insignia, took this a step further by including Fire TV as its base software model. This meant that Fire TV functionality for the first time was available without needing to purchase the Amazon Fire Stick. This was a welcome change as smart TVs became a norm, and the outrageous steep prices dropped.

Wi-Fi connection issues! Why?

With the inclusion of Fire TV, it unfortunately meant that a fair share of problems also came to the Insignia Fire TV. One of the issues users commonly faced was the Fire TV Device wasn’t connecting to the internet. We have all used countless devices that require an internet connection. Sadly, there have been numerous times we have faced internet connection issues using these same devices.

Why are internet issues so common? If you’ve experienced Wi-Fi issues over the years in multiple devices, you realize there could be a multitude of reasons. Let’s look at some of them here.

Your location is probably the biggest factor when it comes to how your internet performs. Optical fiber lines travel under the sea, and the more speed an ISP wants to provide, the higher they need to budget to get their bandwidths from the underwater lines. Developed countries have multiple lines allowing fast internet connections for a lesser cost while developing countries suffer from slow speeds and therefore connections drop.

Slow internet speeds can often cause your devices to drop its connection, which explains why you may randomly experience failure to connect to the net.

Why does Insignia Fire TV not connect to Wi-Fi?

All devices that connect to the internet will face this issue at one point. Understandably, there are several reasons why you might get Wi-Fi connection problems. With our help, you can figure out the root issue without going over hours of troubleshooting and aimless actions.

Some reasons why your Insignia Fire TV won’t connect to Wi-Fi are:
- A minor glitch in your Insignia TV
- Server issues
- Faulty cache issue
- Wi-Fi router issue
- Faulty Fire TV remote connection
In the following section, we will go through the most common ones so you can return to your favorite shows.

How Do I Fix Insignia Fire TV Not Connecting To Wi-Fi?

Restart Your Insignia Fire TV

Simply turning your Fire TV off and then on can quickly solve your problem. The Wi-Fi issue, as with any other device can be simply due to overuse of your TV for a short time. A simple restart should set it straight.

Restart your Fire TV using the dedicated power button. If it somehow doesn’t switch off, you can unplug the power supply directly and reattach it.

Power Cycle your Insignia Fire TV

Sometimes turning off your Insignia Fire TV isn’t enough to get all the electrical power out of its system. Small packages of power can occasionally disrupt the correct restart of your Insignia Fire TV. When this happens, you need to Power Cycle your Insignia Fire TV.

To do this:
1. Unplug your Insignia Fire TV from the power outlet.
2. Press and hold the dedicated power button for 30 seconds up to 2 minutes.
3. Plug the TV in after a while, still holding the power button.
4. Wait until the loading screen appears, then release the power button.
Once you complete these steps, you need to resync your Fire TV remote again by pressing and holding its home button for 30 seconds.

Restart your Wi-Fi router

The internet is connected to your Insignia Fire TV via your internet router. If your router is experiencing some bug or technical issue, then it would be logical to fix the router before trying anything else. The most common way to troubleshoot your Wi-Fi router is to restart it.

You can either switch it off and then on after 10 seconds, or if the router is inaccessible to you, you can access it via the ISP menu using its IP address such as 168.192.1.0. You can check your IP address on any other device by checking the “Information” tab on your Wi-Fi connection. As long as you can access the ISP menu, you can restart your router.

Disconnect other devices

A lack of bandwidth can cause connections to drop in some devices while maintaining it in others. In this case, the unfortunate device to drop is your Insignia Fire TV. When everyone uses Wi-Fi, the internet spreads thin and is shared across all the users.

Disconnect any devices that are not in use from the internet. If that doesn’t work, temporarily disconnect all devices connected to your internet.

Remote Fix

A rather unorthodox fix is using your Insignia Fire TV remote to reestablish connection. Once you receive the “unable to connect to network” message in the Fire TV settings, press and hold the home button of your Insignia Fire TV.

This will bring up an unknown bug and prompt a message in the bottom right corner saying “new remote connected.” We will use this bug to our advantage because, hopefully, whenever you try to connect to the Wi-Fi, it won’t show the “unable to connect to network message”. This hack is temporary and Insignia might correct this soon.

Final Thoughts

Not connecting to Wi-Fi will for all purposes render the smart part of your Insignia Fire TV useless so if your issue isn’t still resolved, get in touch with Insignia customer support ASAP. We hope our guide solved your problem of Insignia Fire TV not connecting to Wi-Fi.

Check out our website for solutions related to Amazon Fire Stick Decryption Failure Error and Sky Q Box Not Connecting to WiFi by clicking the links given .
September 13, 2021
Amazon Fire Stick Stuck On Amazon Screen: Fix With These 5 Steps
You’ve probably encountered your Amazon Fire Stick stuck on the Amazon screen while you wanted to start a night of binge-watching and can’t seem to get rid of it. Don’t fret and follow our thorough guide on how to get rid of this frustrating problem so you can get back to your well deserved screen time.

Amazon is the world’s leading market for online dealings. Over its successful years, Amazon has put its hand into other profitable projects in the technological market. This has lead Amazon to become one of the top five tech companies in the world.

One such product on the market Amazon introduced is the Fire Stick TV. A revolutionary product that could turn any ordinary TV into a smart TV. This technology is now pretty common, but it revolutionized binge watching when Amazon launched the Fire Stick TV. In addition, people saved a lot of cash trying to get a smart TV, which was relatively expensive for a long time.

With all its capabilities, like all technologies, the Amazon Fire Stick was not perfect, and one of its more common problems was the Amazon Fire Stick being stuck on the Amazon screen when booting up a TV or device.

Why Does Amazon Fire Stick Get Stuck on the Amazon Screen?

If you want to get rid of that Amazon stuck screen, you must first know there are several reasons why it occurs in the first place. Understanding the cause can help reduce the fixing time from hours to a few minutes at most. Hopefully, you will be able to get the hang of it by the time you reach the end of this guide.

Reasons why your Amazon Fire Stick is stuck on the Amazon screen
- Power supply issue
- Bugged recent update
- Slow booting
- Settings problem
- Faulty HDMI port
The list may look daunting, but we’re here to get you through this step-by-step in the following section.

How to get rid of Amazon Screen while using Amazon Fire Stick?

1. Wait It Out

Sometimes it’s best to leave your Amazon Fire Stick on the Amazon screen for a few minutes. The Amazon Fire Stick can generally troubleshoot any problems that occur, though this may take some time. According to the official Amazon customer care website, the booting during this process could take up to 25-30 minutes.

If the screen is still stuck after half an hour, consider moving on to the following steps.

2. Check the Power Supply

The most common cause for a stuck Amazon scree is due to the power supply not functioning correctly. A lack of electrical power can cause the device to freeze on the Amazon screen while booting up.
- Check and fix any loosely connected or disconnected component that has to do with power.
- If you are using a USB cable to power your Amazon Fire Stick, try connecting it to a power supply directly instead.
This problem can also occur when you use third-party equipment, as the device will sometimes not recognize those due to compatibility issues. It’s best to use the power cable that came with the Amazon Fire Stick. If the cable is lost or broken, consider buying a new one from Amazons official store.

3. Restart Your TV

Restarting your TV is the simplest of troubleshooting mechanics but still one of the most useful ones you can perform. A minor undetectable internal glitch can easily cause your Amazon Fire Stick to get stuck on the Amazon screen, and you need to restart your TV to get rid of it.

Change HDMI port

The HDMI port where you plug in your Amazon Fire Stick could malfunction, leaving you with a frozen Amazon screen.
- Try to switch to a different HDMI port on your TV to see if it works.
- Dust can build up in your TV’s ports that can cause connection problems. Consider cleaning your HDMI and USB ports, then re-plugging your Amazon Fire Stick.
- If you use an HDMI hub or splitter for your Amazon Fire Stick, then you should try connecting to your TV’s HDMI port directly, as some HDMI hubs can cause power issues.
- Multiple HDMI devices connected to your TV can cause some disruptions and errors in the TV. Try unplugging all devices except your Amazon Fire Stick.
4. Cool your Amazon Fire Stick

Excessive use can lead to overheating in your Amazon Fire Stick, and like all electronic devices overheating can cause significant functional problems. Overheating can also occur due to restricted airflow and tight spaces where it cannot naturally cool down.

Remove your Fire Stick from your TV and let it cool down under a fan for a few minutes. When the metal of the HDMI port is cold enough to touch, insert it back into your TV. You should now experience a faster booting up time .

Before reinserting your Amazon Fire Stick, you should ensure you place the device in a well-ventilated part of the room, or the problem may occur again.

5. Reset Amazon Fire Stick

Since you can’t access anything beyond the Amazon screen on your Amazon Fire Stick, chances are troubleshooting any software malfunction is impossible. You can get stuck on Amazon screen for several software problems, such as a buggy update or a setting causing this to happen.

The only way to fix these internal problems is to hard reset your Amazon Fire Stick using your Amazon Fire Stick remote. To do this:
1. Press the Right and Back buttons together.
2. Hold them for at least 10 seconds.
3. The screen will now prompt reset instructions; follow them to complete your reset.
Final Thoughts

It’s very likely that your device is working perfectly now. We hope our guide was able to fix your Amazon Fire Stick stuck on Amazon screen problem.

We also have easy fix guides for Amazon Fire Stick Decryption Failure Error, Amazon Fire Stick Remote Not Working and Amazon Fire Stick Remote Not Working here.
September 9, 2021
Why Won’t TikTok Let Me Post: Simple Guide To Start Posting
If you’re an enthusiastic TikToker who’s wondering why TikTok won’t let you post, and you’re annoyed that you can’t find a way around it, we’ve got you covered. From copyright violations and watermark issues, to internet problems or outdated apps, we’re here to help you find a solution to your problem and get you back to recording and posting ASAP and not letting your followers wait.

TikTok has taken the world by storm since its introduction in 2018, becoming one of the most downloaded apps on the App Store and Play Store. Accordingly, many zealous individuals took the opportunity of the new platform to start their influencer careers.

With millions of users active every day, the popular app might have a bug or two unresolved for you to deal with. Consequently, that same bug could stop you from posting, which could leave you behind in the ever-changing trends of TikTok.

Why Is TikTok Not Allowing Me to Post?

What you need to remember upfront, is that you probably aren’t the only one facing this problem at the moment. TikTok has a large user base and an ever-changing environment that can get challenging. So, there could be several reasons your account is unable to post to TikTok. It could be a problem on their end, such as a server-wide issue, or it could be the result of something at your end as well, most likely a faulty or busted internet connection.

Here are the most common reasons you’re wondering why TikTok won’t let you post.
- The app is currently in maintenance on the server-side.
- The built-up cache in the app is causing a problem that may be related to you unable to upload.
- Sometimes, the internet connection could be temporally weak.
- The app’s version of is out of date.
- Your RAM might be full due to using TikTok with other apps.
- You may have a copyright violation.
- Posting on TikTok may be blocked.
How long am I Blocked From Posting on TikTok?

If you’ve been blocked from posting on TikTok, you may be looking at a temporary posting suspension of 48 hours up to a permanent ban. A typical shadowban on TikTok lasts 14 days, after which you can return to posting your content.

You can find your block duration by navigating to the Account Updates section of the app. Here, you can find the reasons, nature, and length of the ban you may be facing. After your suspension time, you must remove the videos that caused the ban. We also recommend you wait at least two days before you resume posting more content.

How do You Get TikTok to Let You Post?
- You might believe the ban is not justified and you do have the option to contact support and inquire about your problem. If wrongly imposed, TikTok Support will provide instructions and solutions related to your ban .
- If support is not responding at the moment, you should check the type of song you have used in your video. Some artists do not allow royalty-free usage of their content. If you have used such a track, then a simple solution is just changing the background song to something that fits your video and try uploading again.
- Many TikTokers use third-party applications to edit their videos for more creativity and quality. Some of these third-party applications leave a watermark. According to TikTok’s Terms and Conditions, TikTok will not allow third party watermarks.
- To resolve the issue, upload a watermark-free version of your video, or re-edit the video in another application that doesn’t leave a watermark.
If you aren’t blocked from posting by TikTok, here are several other ways for you to get back to your posting schedule.

Check Internet Connectivity for TikTok Posts
- Check the internet connection on your device.
- Slow internet usually causes run-time errors, as your video takes too long to upload on TikTok’s server.
- Restart your WIFI-device
- Contact your internet service provider so they can instruct you to get your internet speed back on track.
- If you’re connected to mobile data, firstly navigate to your data settings and check if your data is enabled for TikTok. If it isn’t, then you should enable it and restart your device.
- For further help in checking internet connectivity, click here for our detailed guide.
My Device Will Not Let Me Post On Tiktok

1. Clear Multitasking and Restart Device

Sometimes excessive use of multiple applications in a short period can lead to filling up your device’s RAM and unearthing a few minor bugs. These just may be the cause of your TikTok videos not uploading. Here’s what you can do:
- Try navigating to multitasking on your device by pressing the left bottom screen button and clearing all applications, then powering off your device.
- If you are an apple user double-tap the home button and swipe up on all applications and power off your device.
This will restart your device to a refreshed state with a clear RAM and TikTok will run significantly smoother, allowing you to upload your video.

2. Clear Cache

Overuse of the application for several months, especially if you’re a creator, can lead to a large amount of cache build-up in the app. When more date is being processed by your device, TikTok can slow down from the large amounts of cache.

The cache contains data that can make your browsing experience more streamlined but, a large build-up has the opposite effect. So, there is no harm in trying to clear your cache.

Follow these steps to clear your cache:
- Head over to your profile page in TikTok and tap the upper right corner to access settings. Near the bottom of the page, you’ll find a clear cache option. Tap this and your delete you cache.
- If you’re an android user, you can have a more in-depth look at all data and cache stored in TikTok and manually remove what you want.
  - Go to your settings and navigate to Apps & notifications.
  - After that, select TikTok and tap on Storage and Cache.
  - You will now be able to delete selected items from your TikTok storage and cache manually.
Final Thoughts

We understand how frustrating it can be for you and your loyal followers when you can’t upload your content. Therefore, as an extra precaution try uninstalling and then reinstalling Tiktok. This helps you download the newest bug fixes and gives you the latest version of Tiktok.

We hope our guide was helpful to resolve why TikTok won’t let you post. Let us know which option worked for you in the comments section below. Also, hit us up if you have a unique fix for why Tiktok won’t let you post.

For help on Tiktok Ads not displaying, click here. And, for Tiktok sound and mic issues, click here.
August 24, 2021