Search results for: “ tv box”

Xbox Series X Won’t Show On TV – Easy Fixes
The Xbox series is a popular gaming brand owned by Microsoft. Series X was first launched globally on 10 November 2020. Due to its unique design, improved features, and modern look, Xbox Series X gained much popularity globally. Occasionally, Xbox Series X won’t show on tv, and gamers are fed up with it.

If you are looking to upgrade your gaming console to this recently launched Xbox series, then it can provide you with a smooth experience. Most people who are already on the next-generation gaming train might have experienced several awry things.

If you are an Xbox lover and face issues like blank screen and connecting issues, this article is perfect for you. In this article, we will provide you with a step-by-step guide to resolving your display output issue.

Why Won’t the Xbox Series X show on TV?

Screen display issues in the Xbox Series X can arise due to multiple reasons, such as damaged HDMI cable, software error, TV settings issues, and console overheating. Sometimes cable works properly, then the display issue might also occur due to the resolution settings of the console.
1. The first reason that could lead to a display issue is the damaged HDMI cable. If your cable is damaged or if it is not connected properly with the console or TV, then you can face the display issue. It is a common problem as many people didn’t check the cable before using the Xbox.
2. The second reason that could cause a TV display issue is the software error. Sometimes your Xbox may have some technical faults due to which it won’t connect to the TV and shows display output.
3. The third reason for the display issue is the incorrect TV settings. If your TV resolution is not matched with the Xbox’s resolution setting, then you can face the blank screen issue.
4. The fourth reason for the display issue is the overheating of your console. If you continuously use your console then it can overheat due to which you can face connecting and display issues.
5. The fifth reason that might cause the issue is the hardware problem. If the console hardware is not working properly then your TV won’t show the display.
How to Fix the TV Display Issue?

To resolve the TV display issue, you need to do troubleshooting to check the cause behind the issue. The troubleshooting will let you know about the type of situation you are facing to comprehend it and find the proper solution.

For the different possible causes that might cause display problems, you need to follow the step-by-step solutions, which are as follows:

Try Another HDMI Cable

The first thing you should check is the HDMI cable. Sometimes, the Xbox series x won’t show on tv due to the connection between your Xbox console and TV is a common point of failure when it comes to TV display problems. You can easily troubleshoot this problem and also fix the issue.
1. Firstly, check if your HDMI cable is connected properly to the TV and the Xbox. You need to look if the cable is loose or not.
2. Secondly, check the cable if it has any faults. Sometimes pets in your home can chew the cable which could cause the problem.
3. Thirdly, if the cable looks fine, then try to attach it to another device. It should work fine with the Xbox if it works properly.
Inspect the HDMI port

The second thing you should check is whether the HDMI port in your Xbox and TV is damaged or not. This problem can arise for many Xbox users due to extra pressure on the port.

You can check your port thoroughly by first cleaning by blowing the air from your mouth or through a blower. If the port is damaged and you are still on warranty, then you can replace it. Otherwise, you should buy a new port.

Check your TV and Console Settings

The third thing you should do is to check the resolution settings of your Xbox and the TV. If your Xbox has a high-resolution setting of 4K and 120 HZ while the TV has a different resolution, then you may face the display issue. To solve this issue you should correct the setting on either of the devices.

Try Updating Your Software

The fourth thing you should do is troubleshoot the software issue of your console. If your Xbox has software issues like software errors or software updates, you can check the console’s guideline book.

Similarly, if your TV has a software error or needs an update then follow similar guidelines. First, remove any error and then do an update so that it can connect easily to your gaming console.

There Could Be Hardware Issues

There might also be a possibility that your gaming console has some hardware issues leading toward disconnection and no display on TV. If you don’t know about the repairing guideline then you can take it to the repair shop.

Make sure that you should take your Xbox to the repairing expert as the problem can be with the HDMI chip. Since you cannot replace the chip by yourself, you need to take it to some expert. Once the HDMI chip is replaced you will be able to connect the console with your TV.

Probable Overheating Issue

The final thing you should check while resolving the TV display issue is to look for the overheating problem in your Xbox. This issue can arise easily if you continuously use the gaming console for hours.

The overheating issue can melt your HDMI cable, cause resolution problems, and various other technical faults. So, use your console carefully, and also utilize proper ventilation that could cool down the temperature.

Conclusion

Xbox Series X is the latest invention of Microsoft. This gaming console can cause awry things such as no display on Tv and connecting issues. Multiple reasons can cause the display output problem such as damaged HDMI cable and port, overheated console, incorrect TV and console settings, software and hardware issues. You need to follow the step-by-step guidelines mentioned in the article to resolve the display problems.
March 29, 2022
How To Connect Sky Q Mini Box To TV: Setup Your Satellite TV Here
Have you just made an entertainment purchase and now wondering how to connect the Sky Q Mini Box to your TV?

Pairing the Sky Q Mini Box is a simple process, and can be completed in a few easy steps. The package you receive from Sky will include your box and the necessary cables, as well as a smart remote that you will be able to connect to your television.

We have created this easy to follow directory that will teach you how to successfully connect your Sky Q Mini Box to your TV, as well as provide you with a few troubleshooting tips if you are having difficulty with the connection between your media box and TV.

How to connect Sky Q Mini Box to TV

How do I connect my mini box to my TV?

You can connect your Sky Q Mini Box to your smart TV on your own, without needing a technician to come through to do it for you. All the necessary cables that are required to connect your box to your TV will be included in the package you receive from Sky. A successful installation will involve inserting the HDM cable into your Sky Mini Box and smart TV, respectively.

Before we expand on the steps required to complete the set-up of your Sky Q box, there are a few factors you need to take into consideration before you connect your devices.
- Ensure your Sky Q Box is placed in a well-ventilated area
- Do not position your device on a carpet, or in a tight fit space (eg; a cabinet)
- It is recommended to have around 10cm of space around the Sky Q Box
- The device should not be anywhere near heated appliances, such as a radiator or direct sunlight
- No other items should be placed on top or below the box
With your Sky Q Mini Box set in the right position, you can now connect it to your TV with the HDMI and Power cable included in your Sky package;

How to connect Sky Q Mini Box:

Step 1. Insert the pink end of the HDMI cable into the ‘Pink Port’ on your box set

Step 2. Put the other end of the HDMI cable into your television

Step 3. Using the power cable, connect it to the blue port of your Sky Q Mini Box with the other end plugged into the mains

Step 4. Turn your box on at the main switch

Note, you should see a message appear on your TV screen to confirm your device is starting up.

Step 5. Click the ‘Home’ button on the Sky Q remote you received to turn your box on

How to connect Sky Q Mini Box to TV without HDMI

If your TV does not support an HDMI cable, you can connect your Sky Q Mini Box through the use of an AV cable.

Before using the ethernet to connect your Sky Q Box, you need to alter the picture resolution so the display will show on your TV through the AV cable.

To do this, the Sky Q Box will need to be connected to an alternative TV with the use of the HDMI cable;

Step 1. Click on the ‘Home’ button on the remote

Step 2. Select ‘Settings’ followed by ‘Setup’

Step 3. Under ‘Audio Visual’ choose ‘Picture Resolution’

Step 4. Change the resolution to 576p

You can now confirm the changes, and proceed with using an AV cable to your chosen TV.

How to connect Sky Q remote to the TV

With your Sky Q Mini Box connected to your TV, you can now pair your Sky Q remote;

Step 1. Press down on buttons 1 and 3 simultaneously until a red light flashes x4

Step 2. Click on ‘Continue’ and insert the make of your TV

Step 3. You will now be able to choose ‘Find it for me’

Step 4. Test if your remote has been connected by changing the volume

Step 5. If your audio does not change, click on ‘No, try another’

Step 6. Confirm the pairing by clicking on ‘Finish’

Note, if you use a Sky Sound-box or speaker device, you will need to select ‘Yes’ after step 4 and follow alternative instructions.

To ensure your remote does not get damaged, you should not store it in a warm place, eg; on top of your Sky Q Box or near any other electrical device’s air vent where heated air will be extracted.

If this is the first time you have connected your Sky Q Mini box to your TV, you may experience your connectivity to decrease. To help eradicate this altercation, you can reconnect your box with the use of a WPS (Wifi Protected Setup).

How to connect Sky Q Mini Box with WPS:

Step 1. Click on ‘Select’ on your Sky remote (Step two of four will appear on your screen)

Step 2. On your main Sky Q Box (or closest Sky device) hold down on the WPS button for three seconds or until it flashes orange

Where is the WPS button on the Sky Q box?

You will find the button either in the front or at the back of the box.

Step 3. The Wifi protected setup will now take place

Your Sky Q Mini Box will now be configured through a protected Wifi connection.

Why is my Sky box not connecting to my TV?

Why is my Sky Q Mini box not connecting to TV?

Your Sky Q Mini Box will not connect to your TV if the Sky server is down. An outage in your designated area will prevent your Sky Mini Box from accessing the server to process requests. The server can be down due to planned maintenance, and unexpected system error, or your region has a network outage. You can check the service status of Sky to confirm if this is why your Sky Mini Box won’t connect to your TV.

If the Sky server is up and functioning without any issues, your Sky Q box may not be connecting to your TV due to the following reasons;

Reason 1. Sky Q Mini software update

Your Sky Q Mini box may be due to an update, or the latest firmware update was interrupted and did not install successfully.

You can update your device by going; to Settings > Setup > Software Download. This should be done within ten minutes.

Reason 2. Faulty HDMI cable

If the HDMI cable that connects your Sky Q Mini Box to your TV is faulty or damaged, the device will not work.

Check your cable by using it to connect a different electronic item, or change it to a different port to make sure the current one is not damaged.

Reason 3. Sky Q Mini remote not working

Your Sky Q may not be working on your TV because the remote is problematic.

The batteries may be depleted, or there has been a temporary error with the remote’s software. Resetting your Sky Q remote will refresh the pairing with your TV.

How to reset Sky Q Mini remote:

Press down on buttons 7 and 9 until the remote’s light flashes X4. This will factory reset the remote control.

You can now complete the pairing process again. You can refer to the steps already provided in this guide.

If you disconnect your Sky Q Mini Box from the mains and reconnect it after a few minutes, this will help refresh the connection to your TV and should fix the error.

Conclusion

With this informative guide, we hope you were able to connect your Sky Q Mini Box to your TV, and that you are now enjoying the array of channels that you can choose from.

If you are still having problems trying to connect your Sky device to your TV, you may need to contact Sky directly.

You can call them on 03337591331, however, their phone lines are extremely busy, so it is advised to check out if the Sky Community page can help you with your query first.

Feel free to drop us a comment if you would like us to assist you with anything else.
February 13, 2022
Xbox Live Won’t Connect: Get Access To Multiplayer Online
If Xbox Live won’t connect, have you checked if your internet connection is active without any latency issues?

Xbox Live is an online platform, so it must be constantly connected to a network that supplies adequate bandwidth.

Besides your internet connection, is there a pending software update on your device? An outdated operating system is another cause of this connection issue.

There are a few simple solutions you can execute on your device if your Xbox Live won’t connect. With this guide, we will expand on these fixes, as well as provide you with enough information so you can understand why you have experienced this setback on your Xbox console, or Windows device.

Why won’t Xbox live connect?

Xbox Controller

Xbox Live won’t connect if the platform’s server is down. If this happens, the request from your console to access the server won’t reach the Xbox Live database which is why you may be left on an Xbox ‘connecting’ display. Because Xbox Live operates through Microsoft, if there is an outage, it can affect Xbox Live.

If there are no issues with the server, Xbox Live won’t connect if the following errors have occurred;

1. Poor internet connection

Because Xbox Live is an online multiplayer platform to play games, you need to connect it to a stable internet connection to work.

If your network connection is unstable or unable to supply adequate bandwidth, Xbox Live won’t be able to connect.

2. Pending updates

Your console, whether an Xbox or Windows device may have updates that you need to complete for your device to connect to the Xbox Live service.

If you use an outdated operating system, you will be more prone to performance-related issues.

3. Faulty cables

If you are on an Xbox, your connecting cables could be faulty or damaged which is preventing your console from getting a secure connection.

4. Throttled network

An overload of multiple devices connected to the same network will sometimes interfere with how well a device can connect because it won’t receive the right amount of bandwidth.

Xbox Live won’t connect it has to compete with many other devices to receive an adequate connection.

How to fix Xbox Live won’t connect

Xbox Live won’t connect

First, check the Xbox Live server to confirm if the whole platform is down. If the Live server is down, you will need to wait until Microsoft sort out the issue from their end. This may affect other elements of the program. When Xbox Live won’t connect it will interfere with your login and gameplay.

However, if the Xbox server is up and running, you will be able to troubleshoot your device with these easy steps;

1. Reset internet connection

A reset on your Wifi router will refresh your network and allow Xbox Live to re-establish a connection to the server.

To complete this, unplug your modem after you switch it off. Leave it alone for a couple of minutes before you reconnect it.

Once your Wifi connects again, launch Xbox Live.

Tip, you can also check the performance speeds of your internet connection.

2. Complete updates

If there are any pending updates, make sure you action these. You want to always operate on the latest version to ensure performance issues have been fixed, and any bugs that were in your previous operating system have been removed.

Check the OS version on your device, as well as your browser to see if you can activate an update.

3. Check cables

If you’re on Xbox, check that your cable is connected securely and that there are no faults or any damages.

You can test your HDMI on a different device to see if it works. If it doesn’t, you will need to replace your cables.

4. Disconnect devices

Disconnect any devices from your network if you do not need to use them. This will free up your bandwidth so Xbox Live doesn’t need to compete for bandwidth.

Once you’ve done so, restart your Xbox Live device and relaunch the app.

5. Reset your console

Reset your console to get rid of any contaminated software that may be sitting in your system.

Turn your device off for a few moments and unplug it. Reconnect it and turn it back on.

Relaunch Xbox Live.

Does Xbox use a special HDMI cable?

Xbox Live won’t connect

Xbox does not use a special HDMI cable. When you first purchase your Xbox (Series X) an HDMI cable that is 2.1 enabled will be included. A 2.1 cable is used to support 4K gaming at high speeds. You do, however, need to connect this cable to a 2.1 HDMI port on your TV.

You can use this cable without a TV that is 2.1 enabled.

If you’ve found that your HDMI is damaged, which is why Xbox Live won’t connect, you can find a replacement cable on Amazon.

(Did you know; there are around fifty million active users on Xbox Live).

You can check out their variety here.

Why is Xbox Live not letting me sign in?

Xbox Live won’t connect

Xbox Live won’t let you sign in if there’s been a recent system glitch. This error will stop your request from reaching the Live database when you try and request access. This can be caused by a momentary loss of connection, or if Microsoft has experienced an internal error.

Are you certain you have the correct username details? You won’t gain access to your account if you are using the wrong login credentials.

If you’ve forgotten your password, you will be able to reset your security information by selecting ‘Forgot Password’.

Have you experienced an error code on your device when you try and make use of your Xbox Live account?

How can I gain access to my Xbox Live account?

You can regain access to your Xbox Live account if you have the correct login details by using the following steps;
- Restart your Xbox console or Windows device
- Check for system update
- Change your password
If you are on an Xbox, you can reboot your device by holding down on the ‘Power’ button for around ten seconds when the console is still on. You can turn it back on.

Why won’t my Xbox connect to Xbox Live with WIFI?

Photo by Billy Freeman on Unsplash

If your Xbox is not connected to the correct network, it will be unable to connect to Xbox Live. In the settings section of your console, you need to ensure you have chosen the right Wifi, and that you have input the correct password for your internet.

If your Xbox console has already been paired to the correct Wifi network, your ISP (internet service provider) may be down or experiencing performance issues.

This will interfere with your console gaining access to the Xbox Live server.

You should first check that you have configured your console to the correct Wifi network with the correct password;

Step 1. Open Settings and select ‘System Settings’

Step 2. Check you have chosen the correct Wifi network

Step 3. Re-enter your password

You should be able to press ‘Test Xbox Live connection’.

Conclusion

With this easy to follow guide, we hope we’ve helped you understand why Xbox Live won’t connect on your device, and that you were able to rectify this problem with one of our simple solutions provided.

If, however, this issue persists after executing each step, we suggest you either make use of our online JustAnswer page for an immediate answer or contact Xbox Support directly.

(Quiz Question; how many active users are on Xbox Live?).

Complete our online contact form with your answer in the comments box. Feel free to include any feedback or queries you may have.
April 10, 2022
Xbox Live Keeps Charging My Card: Fix Your Subscription

If Xbox Live (now known as Xbox Network), keeps charging your card, you should have an active Xbox Live Gold subscription that you are using.

This service will grant you access to online multiplayer games and be billed monthly for the added features.

From your Microsoft account, if you have an active Xbox Game Pass, your card will be charged for this too.

You can stop Xbox Live from billing your account by completing a few simple steps.

In this guide, we will explain why Xbox Live keeps charging your card, and how you can disable the necessary settings so you no longer have to worry about being charged for a service you may necessarily not need on you Microsoft account.

What is Xbox Live and do I need it?

Xbox Live keeps charging my card

Xbox Live is an online service specifically for everything Xbox related. This platform allows Xbox users to gain access to play multiplayer games on their console. With this account, you gain access applications, movies and TV shows all downloadable onto your Xbox console.

You can sign up to Xbox Live (Xbox Network) for free, but Xbox Live Gold will require you to register for a monthly subscription in order to access all the features.

Do you need to have Xbox Live Gold?

You don’t need to have an Xbox Live Gold subscription to play certain games as some are available for free, however, without Gold, you may be limited to a specific set of games, and you won’t be able to play online.

Activating a Live Gold subscription will give you access to play online multiplayer games that aren’t originally for multiplayer, the option to game record as well as sharing media.

So, if Xbox Live keeps charging your card, we’ll now take a look into why this is occurring on your Xbox account.

Why does Xbox Live keep charging my credit card?

Xbox Live will keep charging your card because Live Gold is a monthly subscription that is by default, enabled for auto-renewal. You can sign up on Xbox Live for free. However, if you’ve registered for the Gold option, Microsoft will charge you every month to keep the service active.

When you first registered for Xbox Live Gold, you should have been instructed to input your account information.

(Did you know; it is estimated, that the Xbox controller will wear out only after three million presses).

The Xbox Game Pass and PC Game Pass are also both subscription based services that will charge you a monthly fee until you cancel your membership.

How do I stop Xbox Live from charging my credit card?

Online Gaming

Disable the auto renewal feature to stop Xbox Live charging your card. This can be done by following a few simple steps, which we will outline for you. Keep in mind, if you turn off the recurring billing option, your Xbox Live Gold subscription will end once the prepaid time has come to an end.

How do you turn off auto renewal for Xbox Live

Step 1. Access your Xbox Live Gold account by logging in to your Microsoft account

Step 2. Open the ‘Services and Subscriptions’ page

Step 3. Click on ‘Manage’

Step 4. Press ‘Turn off Recurring Billing’

Confirm you want to disable the auto-renewal. This will stop your card from being charged on the next due date, and your Gold subscription will end.

What happens if you cancel Xbox Live Gold?

If you decide to choose ‘Cancel Subscription’ your Xbox Live Gold account will cease immediately. All services and features will no longer be available to you that are included in the Gold pass.

You may be eligible for a refund depending on the date of your cancellation within the billing month.

Can I cancel my Xbox Live Gold membership and get a refund?

Microsoft will refund you if you cancel your Gold subscription within thirty days of your initial purchase. If you cancel before your first recurring bill, you will be eligible for a refund.

You will also get your fund back if you cancel before thirty days after your payment has taken place.

Note, a refund will only happen once per subscription service on one Microsoft account. If you have already received a refund on your account, you won’t be able to receive it a second time.

Paid for Xbox Live Gold but can’t play online

Xbox Live keeps charging my card

Your payment for an Xbox Live Gold subscription may have not been processed successfully if you’re unable to play online after making your purchase. This could be due to your payment not being verified for your bank to process the transaction, or the account details you entered were incorrect.

Additional reasons why you can’t play online include;

1. Subscription still needs to be added to your account

There may be a delay in your account updating your details. If you have only just made your purchase, the Microsoft server could still be processing your changes before the database adds the additional information.

Note, if the Xbox server status is experiencing issues, this will interfere with your Xbox Live Gold subscription being added to your account. You can check the Xbox service status to confirm if the server is is down.

2. Rejected payment

Your payment details may have been rejected due to insufficient funds or a technical issue occurred with your bank.

If your internet connection dropped while the payment was being processed, this would interfere with the transaction.

3. Incorrect account

Make sure you’re logged in to the correct Microsoft account that you subscribed to Xbox Live Gold through.

4. Xbox console out of sync

Your Xbox console may be out of sync with your Xbox Live accounts. This can occur if there’s a delay from an unstable internet connection, or your Xbox has a slow RAM.

If you want to refresh your Xbox Live account and console, you can complete a power cycle on your device. This will refresh the connections, and sync your information.

To do this, simply hold down on the Xbox button until it switches off. Leave it on shut down for around two minutes before you start it up again.

Conclusion

With this simple guide, we hope you now know why Xbox Live keeps charging your card, and that you were able to either disable the auto-renewal, or cancel your subscription without any issues.

If you are still having issues with your card being incorrectly billed, we recommend you contact Microsoft as soon as possible.

You can contact them here, where you can either choose to speak to one of their virtual assistants, or submit a form.

(Quiz Question; how many presses does a Xbox controller need before it will start to wear down?).

Complete our online form with your answer and any additional feedback you might have.

April 8, 2022
What To Do When Your LG Smart TV Won’t Connect To WiFi
LG has been giving Samsung a tough time for a long time now, but their TVs are no stranger to problems. For instance, numerous users find it difficult to watch their favourite shows on Netflix because their LG Smart TV wont connect to WiFi.

LG has made its mark in the TV industry with its superb video quality and audio clarity. TVs from LG are perfect for gaming and binge-watching seasons as they contain AI-driven contextual picture enhancement and sound pro features.

Few easy fixes have been discussed in this article that will help you resolve your WiFi connectivity issues to resume watching your favourite movies.

Why Won’t LG Smart TV Connect to WiFi?

There are many reasons behind the Wifi connectivity issues with LG Smart TVs. One of the most common reasons behind this failure is incorrect information about the network. The other reason for the trouble is the presence of generic bugs in its operating system.

Here are some steps to resolve your issue:
- All the LG Smart TVs come with built-in Internet clocks that are purposely used to keep track of time. If someone is using an unsynchronized network then trouble will occur.
- Sometimes, Tv shows temporary errors in Smart functions. In such cases, an error code appears on the Tv screen and the apps stop working. This is mainly because of a generic bug. In such a scenario, wait for several hours and see if the issue is resolved.
- Wifi is home to many devices including laptops, smartphones, tablets, and security cameras. When there are so many devices connected on the same network the connectivity issue will arise for sure. This results in a slow internet connection hence wifi will not connect with the LG Smart Tv.
- An old Firmware also causes connection errors. Always update Tv’s firmware. It enhances the Tv’s performance, fixes bugs, clears security holes, and improves the compatibility with the device.
- If the router and Tv are placed at far end places, the weak signals will give a tough connection time. For this, one needs a network over coax or power like an adapter for ethernet for a stable connection.
There are many reasons why LG Smart Tv is facing difficulty in connecting to the Wifi. The most common reason is signal strength or the compatibility of the router with the device. One can resolve most of the connection errors by simply resetting the Settings of Tv or by changing the router’s security settings.

How to Fix the Issue when LG Smart TV is not Detecting Wifi?

If the Tv is not detecting the Wifi network, then the most obvious reason is the defective/ faulty WiFi module. Sometimes, the WiFi network is active and easily accessible to other devices but it does not work on Tv.

TVs under warranty benefit the user in contacting the store and claiming a warranty. However, someone who does not have any warranty, and is comfortable in disassembling his electronics can easily reset and successfully remove the Wifi module.

8 Fixes When the LG Smart TV Wont Connect to Wifi

After thoroughly explaining why LG Tv is not connecting to the Wifi and why it does not detect Wifi. Here is a list of some recommendations and fixes that will enable you in resolving the issues. Some of the fixes are tried and tested and always work so one should not skip them.

Change the DNS Settings to 8.8.8.8

Most of the time, change in DNS settings works and helps in overcoming connection failure. Just follow these steps:
- Go for All Settings in the Settings Menu.
- Now choose Network > Wired Connection/ Wifi Connection from the drop-down menu.
- Click on the Status “Connected to the Internet”
- This displays DNS server settings, edit the settings by clicking on Edit.
- Uncheck the box that shows the option to Set Automatically
- Select DNS server optionType 8.8.8.8 in the address bar.
- Click on save
Buy a Streaming Stick

Buying a streaming stick is an expensive investment, but it’s worth it in the long run. However, it is much less expensive than replacing some parts of the LG Tv or buying a new one. Streaming sticks have proved to be one effective source for Smart TVs.

Alter Time and Date Settings

This approach might sound naive or childish but some users have sworn on its authenticity. All one has to do is to change the settings manually and adjust the time and date accordingly.

For this, open Settings > General > Date and Time> Uncheck Set Automatically > Set Local Time and Date Manually

Power-Cycle Smart Tv

One of the swift ways to repair a Smart Tv is to power cycle it. This process includes draining the residual power of the LG Tv. It is one of the fastest and simplest techniques to solve the problem either with an internet connection, audio, video, or electricity connection.

Remove and disconnect the Tv from the power source and then press and hold the power button for at least 30 seconds. Reconnect the plug and restart the Tv. Now check if the devices are connected to the Internet.

Sometimes, when lots of devices are connected to the network resource, it causes an inability for LG Tv to get linked to the Wifi. This also causes buffering and congestion. Either upgrade the router to a higher bandwidth or remove extra connected devices to maintain the network connection.

Change the Position of Wifi Router

Everyone knows that Wifi transmits and transfers data through radio waves. Any interference in these radio waves results in dropped signals, sluggish network, data communication and transmission delays, and poor power of signals. These interferences cause connectivity issues with Smart TVs.

The interference is easily avoidable if the router is positioned close to the TV. It is always a perfect solution to switch off all the devices and wireless networks. Or, simply turn them off so that signals reach the Smart Tv easily.

Update Smart Tv, Firmware, and Software

Smart TVs require new updates now and then to ensure that the devices work to their full potential. Firmware updates augment the device’s features and fix errors.

Reboot the Router

Rebooting the router often works and helps the user in connecting Wifi to LG Smart Tv. Sometimes the routers are left On for a long time and they often surface connection issues. A quick restart often fixes the error.

Factory Reset LG Smart Tv

If any of the above-recommended fixes are not working then it is time to do a factory reset. Resetting the Smart Tv to its original manufacturer settings resolves compatibility issues automatically.

The user can locate this option from the Home option in settings. This mode will enable users to factory reset their devices.

Conclusion

The issue of LG Smart Tv wont connect to Wifi can be easily solved with the above-mentioned recommendations. The bugs can be easily fixed and connection issues can be easily solved. One can also get to know about the reasons behind the connection issue from this article.
March 29, 2022
HDMI Cable Wont Work On Samsung TV: Easy Solutions
HDMI is one of the key components in any entertainment system. Samsung TV, gaming consoles, video projectors, set-top boxes and streaming devices need an HDMI cable for connection. Oftentimes, our HDMI cable wont work on Samsung TV, which indicates that either there is some fault in the cable or the HDMI cable is damaged.

PlayStation, Xbox, desktop computer, media players can be easily connected with Samsung Tv. There’s a special PS5 HDMI cable that gives users a better connectivity experience. The HDMI port in Samsung Tv will show an error or no signal when there is some issue in the HDMI port.

The connection error mainly occurs due to compatibility issues with the Samsung TV requirements. Or, there is some configuration problem with the HDMI cable. Sometimes, the configuration is fully functional but the HDMI cable causes connectivity issues with the port.

Why HDMI Cable Wont Work on Samsung Tv

The connection issue mainly arises due to problems in hardware or software. For instance, there can be a problem with your Samsung TV, you may also be using a damaged cable or there may be some fault in your TV’s HDMI inputs.

Sometimes the user experiences errors and issues due to twisted HDMI cable. Or, when the wire is not connected in the right direction. For this, always make sure that the HDMI cable is plugged in the right direction. After that, go to the Source Menu and ensure that the HDMI input source is selected.

The device connection is another reason for cable detection. When the device is broken or it has some hardware issues then the HDMI cable will not give any output.

Common Reasons that Why HDMI Port will not Work on Samsung Tv

The possible reasons for the error might include:
- The resolution of Samsung Tv and resources are not the same.
- The Tv is in input mode and the device is not connected.
- There is no connection at both ends of the HDMI cable.
- The HDMI cable is faulty.
- There is some power shortage.
- The source is unplugged.
How to Fix Samsung Tv No Signal from HDMI Ports

There often arises issues when the Samsung TV does not give any signal even when the HDMI cable is plugged in. For this, always use high-end quality 4k cables and after that reset the HDMI ports and Tv.
- Switch off all the devices that are connected to the Tv via HDMI cable.
- Disconnect all the HDMI cables from the Tv. Switch off the Tv.
- After unplugging from the wall, wait for 10 minutes.
- Switch on and hold the power button of the TV for 30 seconds.
- Plug back all the HDMI cables.
- Replug the Tv and all the devices.
Electrical devices are always prone to failures. An issue solved now can arise later at any moment. But once the reasons behind the failure are identified they can be resolved easily.

Why there is No Signal on Samsung Tv when the HDMI Cable is Plugged in?

To understand the problem in detail it is vital to understand the root cause. When Samsung TV displays no signal even when the HDMI cable is attached, this displays several factors. The user, at times, puts his entire focus on large issues and ignores the small ones that include:
- The HDMI port has some dust or other fine particles.
- The source device is faulty.
- Connection issue in the HDMI cable.
- A faulty port can be repaired by a technician only.
How to Solve the Issue of HDMI Cable Wont Work on Samsung Tv?

Here are some easy fixes that you can implement on your own.

Make Sure that the Connected Device is On

Many of the Samsung TVs were launched after 2017. The latest Samsung TV Models have the ability to automatically detect devices as you connect them via HDMI. However, you need to unplug the cable to reset the connection.
- Switch off the external device
- Wait for almost 10 seconds
- Switch it on again
Opt for a Different HDMI Cable

Sometimes the compatibility issues cause issues in connection. Another reason can be the faulty HDMI cable.

If someone is facing trouble while connecting their PlayStation, Xbox to Samsung Tv or any other device, he must try a different HDMI cable.

Getting a new cable is always preferred to solve the connection problem. Braided and high-speed cables are perfect for users as they have minimal damage risks.

Choose a Correct Input Source

When someone is using an external device on Samsung Tv, he has to initially select the same source on the Tv as the device.

The user must connect the console to HDMI 1 port and select the option of HDMI 1 on the source TV. If the user is unable to see any signal then there must be some confusion between the ports.

Reconnect the HDMI Cable

You should expect an error if you fail to properly connect your HDMI cable. Sometimes loose connection of the cable also causes problems.

To solve the issue, disconnect the HDMI cable from the source and TVs back. After that:
- Reconnect the HDMI cable strongly to the external device
- Reconnect with Tv now
Power-Cycle External Device

Refreshing and power-cycling the external device might solve the issue.

Disconnect the device from the power strip or wall. Now, wait for 60 seconds. Reconnect the input source again.

Now, turning on the power again might help in resetting the Tv.

Inspect Software Updates

Sometimes updating the input software resolves the issue. When there is a signal regarding loss of HDMI, try these steps:
- Open Settings menu
- Select Support option
- Choose option of Software Update
- Click on Update now
One can also choose to automatically update the software by:
- Clicking on the option of Settings
- Select the option of Support
- Now choose the Software Update option
- Select Auto Update Now
- Turn on the option
Factory Reset Samsung TV

This option resets everything and deletes all the settings. The user has to enter HDMI inputs again. For this the user has to:
- Click on the settings
- Choose the option of General
- Select Restart
- Enter own Pin or 0000
- Click on reset
- Click on OK and the reset will be complete
Conclusion

There can be many reasons why HDMI Cable Wont Work on Samsung Tv. This article briefly explains the reasons and solutions to troubleshoot the issue at home. The most common reason for error arises due to incorrect input sources. These errors are easily manageable at home. Some other hardware issues are also easily solvable if the user adopts the step by step solutions in this article. However, if you are still facing errors then you must contact an experienced technician.
March 28, 2022
Xbox Series X Won’t Do 1440P 120HZ: Set The Resolution

If your Xbox Series X won’t do 1440P 120Hz, your TV may not have a 2.1 supported HDMI port for your console to connect to.

Sometimes, Xbox users have been able to experience a 1440P and 120Hz display through the use of a 2.0 port with their 2.1 HDMI cable.

The 4K display setting on your Xbox Series X can interfere with your console’s screen. Turning this off has helped rectify this error.

Did you know, having Xbox set to 120Hz can help improve how well you perform in your games due to the quicker image changes? This eradicates latency, so your console will process your requests faster.

In this easy to follow guide, we will explain why your Xbox Series X won’t do 1440P at 120Hz and what steps you can take to help fix this problem if you are making use of a compatible TV or monitor, so you can enjoy your gameplay with a sharper image.

What is 1440 120Hz on Xbox Series X?

What is 1440P 1220Hz on Xbox Series X

1440P 120Hz the Xbox Series X is the image resolution and your screen’s refresh rate per second. This is the overall image quality that your console will display on your screen. A 1440 resolution will have a sharper image compared to 1080P. A 120Hz refresh rate means your Xbox image will be able to change 120 times within a second.

These two image configurations are available in the settings section on your Xbox Series X. They should be set to be compatible with the TV your console is connected to.

What resolution is best for Xbox Series X?

1440P is the best resolution for your Xbox Series X to be set to.

The Xbox Series X has a maximum frame rate of 120Fps. Your Xbox Series X will be able to make use of this rate if your TV supports it.

How do you know if your TV supports 120Hz?

If your TV has an HDMI port of 2.1, this will confirm it will be able to support 120Hz. A 2.0 port will support 60Hz, however, some televisions will support 120Hz with a 2.0 port.

(Did you know; A music composer, named Brian Eno is the person who created the Microsoft start up tone. He wrote the short piece specifically to be used for Microsoft. Brian has worked with artists such as U2 and David Bowie).

Why Won’t My Xbox Series X Work on 1440P 120Hz?

Why won’t Xbox Series X do 1440P 120Hz?

Your Xbox Series X won’t do 1440P 120Hz if your console is not connected to a monitor that supports a 2.1 HDMI port. Your TV will need to contain a 2.1 compatible port for your Xbox console to be able to display the image at a 1440P resolution and a 120Hz frame rate.

Most modern TVs are being manufactured with a 2.1 enabled HDMI port but may have other configurations that could interfere with your Xbox Series X making use of 1440P and 120Hz simultaneously.

Other reasons why your console is won’t do 1440P 120Hz include;

1. Smart TV cannot do 1440P and 120Hz concurrently

Some TVs support 1440P and 120Hz, however, are unable to be set on these at the same time. If this is the case, your Xbox Series X will only be able to make use of the setting that has been enabled on your television.

2. 4K Enabled on Xbox Series X

Xbox Series X users have reported on Reddit that having the 4K resolution turned on in the video mode has interfered with their console operating on 1440P 120Hz.

3. Faulty HDMI Connection

If the HDMI cable that is connecting your Xbox Series X to your TV is damaged or faulty, it can interfere with the quality of the image being displayed on your screen.

It will also need to be inserted properly in the HDMI port to ensure the picture appears without any issues.

How to Get 1440P 120Hz Xbox Series X

Xbox Series X

You can get your Xbox Series X to do 1440P 120Hz by making sure you have connected your console to a TV that includes a 2.1 HDMI port and supports the 1440 resolution. Because your Xbox will come with an HDMI 2.1 cable, it will automatically detect the 120 frame rate when it is plugged in.

If your TV is not compatible with the 2.1 HDMI, you can try using a 2.0 port and see if it will work, otherwise, swapping to a different television if you can be the solution.

How to set Xbox Series X to 1440P

Step 1. Open the Settings on your Xbox

Step 2. Under the ‘General’ tab select ‘TV and Display Options’

Step 3. Click on ‘Resolution’ and change this 1440P

Your Xbox will update this setting and may ask you to confirm if you want to keep the resolution.

Once this has been set, check the resolution setting on your TV or monitor, and make sure you have selected the correct option.

2. Disable 4K Setting on Xbox Series X

Turning the 4K setting off on your Xbox Series X will stop this feature from interfering with the 1440P 120Hz not working.

Step 1. Launch Settings

Step 2. Open ‘TV and Display Options’

Step 3. Under the ‘Advanced’ tab select ‘Video Modes’

Step 4. Untick ‘Allow 4K’

Once this has been updated, refresh your Xbox by completing a restart.

3. Check Xbox HDMI Cable

A damaged HDMI cable connecting your console to your TV may be the reason why your Xbox Series X won’t do 1440P 120Hz.

If it is faulty, try swapping it for a different cable, or potentially, replace it with a new cable.

Note, if your Xbox Series X is displaying a Black screen it can be due to a problematic HDMI cable, so you should be experiencing additional issues if the problem lies with this part of your console.

Can HDMI 2.0 do 1440p 120Hz?

2.0 HDMI Cable

Some gamers have been able to experience 1440P 120Hz image quality with a 2.0 HDMI connection cable and port. A 2.0 HDMI does allow 120Fps as well as 1440P if your TV allows it, otherwise, you can experience this display resolution with the use of a monitor.

Using a 2.0 HDMI cable and/or port will not give you a definite 1440P 120Hz screen, so your best bet to receive this display is to ensure you have a 2.1 HDMI supported cable and port.

Normally, you will know if your screen supports 120Hz because the option will not show up in the frame rate list in the settings section of your Xbox.

Conclusion

We hope after following this guide, that you can now comprehend why your Xbox Series X won’t do 1440P 120Hz when you want to play games, and that you were able to get your display to be re-configured to this setting.

(Quiz Question; who composed the Microsoft startup sound? Submit the online contact form with your answer).

If you are experiencing further display issues with your Xbox Series X, we suggest you make use of the Xbox Support page. Keep in mind, if the Xbox server is down, you may have difficulty reaching their website.

To check the Xbox service status, you can use this link.

March 17, 2022
Xbox Series X Controller Not Charging: How To Regain Power

Is your Xbox Series X controller not charging?

This issue with your gamepad will transpire for different reasons, depending on if you are using AA batteries, the Xbox rechargeable battery pack, or the HDMI cable.

Luckily, these parts for your Xbox controller are easily replaceable and can resolve the problem of your Xbox controller not receiving enough power.

We have created this simple guide for you to follow, so you can understand why your Xbox Series X controller is not charging, as well as provide you with effortless fixes so you can get your Xbox gamepad to be fully charged, and carry on playing without any further disruptions.

Why Does My Xbox Series X Controller Not Charge?

Why won’t my Xbox Series X controller charge?

Your Xbox Series X controller won’t charge if the charging cable is faulty. This is one of the most common causes for your controller to to continuously have a depleted battery. Along with the USB-C cable, if the charging port (where your cable connects) is damaged, power will not be transmitted through to charge your Xbox controller.

If you are making use of the Xbox Play and Charge Kit, the USB-C cable will come with a rechargeable battery. Besides experiencing issues with the cable, the battery can incur issues too.

We will expand on the other possible causes for your Xbox Series X controller not charging;

1. Problematic Xbox Rechargeable Battery

Your Xbox Series X controller will work wireless, however, if there is a fault with your battery, it will not recharge properly, or, not keep the power once it has been disconnected from charge.

2. Xbox Series X Firmware is Outdated

If the firmware on your Xbox Series X is needing to be updated, this can sometimes interfere with your controller charging or not.

Outdated software can be a catalyst for system errors on your console.

3. Damaged Internal Components on Xbox Controller

Have you recently dropped your Xbox Series X controller?

If an internal component of your controller is broken or damaged, it will prevent the controller from charging properly.

4. Dust Build Up in Charging Port

It has been previously noted that if the charging port gets dust and debris built up within its components, it can stop your controller from charging.

How to Fix Xbox Series X Controller not Charging

How to fix Xbox Series X controller not charging

You can fix your Xbox Series X controller not charging by checking your USB-C charging cable, and replacing it if it is damaged or faulty. You can check your Xbox USB by connecting it to a different device. If it works, then you know your cable is functioning.

If this is the case, this will confirm you will need to further troubleshoot your Xbox Series X controller;

1. Replace Xbox Series X Battery Pack

If your Xbox rechargeable battery is faulty, you will need to replace it. You will not be able to make use of a battery if it does not keep the charge once it has been taken off charge.

Standard batteries will lose power over time and will need to be replaced.

2. Update Xbox Firmware

Updating the software on your Xbox Series X will help eradicate any current system errors on your console. This will improve the performance and get rid of any corrupted files that may be stopping your controller from charging.

How to Update Xbox Series X Controller

Step 1. Turn your Xbox Series X on

Step 2. Click on the main Xbox button on the gamepad

Step 3. Get to the ‘Profile and System’ tab and press ‘Settings’

Step 4. From the left-hand side, choose ‘Devices and Connections’ followed by ‘accessories’

Step 5. Choose your controller and select the three dots

If an update is pending, you will be able to click ‘Update Now’ from the left-hand side.

Tip, it’s worth checking if your console has a due update in the system settings, however, this should update automatically.

3. Replace Xbox Controller

If your Xbox controller is damaged because an internal component is damaged, you may need to replace your controller or make use of a spare one if you have one.

4. Clean Xbox Charging Ports

If the charging port on your Xbox controller has a build-up of dust, it can prevent a successful charge.

You can clean the port by using compressed air, or, blowing hard into it. If you notice there is quite a bit of debris, you can use a toothpick (anything small and non-metal) to gently take it out.

Replace Xbox Series X Controller Parts

Xbox Series X controller parts

If you have been unable to fix your Xbox Series X controller from not charging, you will probably need to look into replacing either the HDMI cable, battery or controller, depending on what part has been damaged.

If you have a TV that supports a 2.1 HDMI cable, you should stick to purchasing the same cable your Xbox Series X came with.

Why should you use a 2.1 HDMI cable for Xbox Series X?

A connected 2.1 HDMI cable will give you an improved frame rate, meaning your Xbox Series X will perform better, with a higher quality display, and faster image changes.

Your Xbox will perform better with this cable. You can check out this cable on Amazon.

Xbox Series X Rechargeable battery

If you are making use of a rechargeable battery, you can purchase a new pack that includes the USB-C cable on Amazon, so you can replace both parts for your Xbox controller.

You can check this deal out here. The battery will fully charge within four hours, so you can get back to playing with your wireless controller. It will last for up to thirty hours after a full charge, depending on how often you’re on your console.

(Did you know, Microsoft assisted Apple from going bankrupt. Apple is very successful, however, in 1997, the company was in financial trouble and almost had to declare bankruptcy. Microsoft then invested around 150 million dollars, which was not celebrated as much due to the rivalry between the two companies).

For more serious issues that require you to replace your Xbox Series X controller, you can purchase one from Amazon. Here, an HDMI cable will be included, which is always good to have a spare if your current one is still working.

Amazon has multiple different controllers you can choose from. Here, is the standard Xbox Core Wireless edition.

How to Know if Xbox Series X Controller is Charging

How to know your Xbox Series X controller is charging

You will know your Xbox Series X controller is charging because there will be a battery icon displayed on your screen. This image will include a little plug with a white bar. This bar will determine how much percentage your battery is charged up to.

Once your battery is fully charged, the bar will be completely white.

The Xbox Series X controller does not have a charging light. The light on the controller will, however, blink continuously when the battery has been drained to warn you it needs to be charged, or, the AA batteries need to be replaced.

Where Can You Find the Charging Icon on Xbox Series X Controller?

If you want to check the battery percentage of your Xbox Series X controller, you can find it on the dashboard screen.

All you need to do is press the Xbox main button. The battery logo should be at the top right of your display.

Conclusion

We hope this easy to follow guide has helped you understand why your Xbox Series X controller was not charging, and that you were able to fix this issue with one of the four simple solutions provided.

If you are not making use of AA batteries to power your controller, and you need a replacement battery pack or HDMI cable, be sure to check out the links we have included to help you make the right purchase.

For a more serious issue, such as a hardware issue with your Xbox console, you can make use of the Xbox support page where you will be able to contact their support team.

(Quiz Question; which company did Microsoft help out our bankruptcy? Include your answer in our online contact form).

March 14, 2022
Funimation Not Working On Samsung TV: Fix In 4 Easy Steps
Trying to watch your favorite Anime on Funimation but are encountering error messages? You’ve come to the right place. With an increase of issues on the Sony Anime platform, we have come up with some resolutions in order to resolve any errors you may be having.

We have a range of guides in order to help you fix your Funimation issue. If you are having issues specifically with your Samsung TV and Funimation, this is a great place to start.

Alternatively, if you are having issues with your Funimation sound or you are a getting black display we also have some guides to provide in-depth help with these.

Why is Funimation Not Working on my Samsung TV?

Photo by Branden Skeli on Unsplash

Unfortunately, like most streaming services, Funimation can encounter issues such as outages, therefore a great place to start if you are having issues with Funimation is to check the Down Detector. The Down Detector will provide the latest reports of an app or site being down, based on reports.

However, if the issue isn’t to do with Funimation being down, here are some other common reasons why Funimation is not working on a Samsung TV.

The app needs updating

Users on Reddit have reported that if the app is not updated, this quickly becomes an issue for Funimation. If it is not updated regularly, then it may stop working. To find out if your app needs updating, head to the app store and search for ‘Funimation’ then click on the page, and locate the ‘update’ button. If you do not see one it is likely you are running the latest version.

You have no internet connection

If your internet connection is patchy or you’re attempting to use public WiFi this may cause issues for watching Funimation. Unless you have a premium account, you will require an internet connection to watch all Anime on the site.

Your TV is outdated

If you are trying to get Funimation on your Samsung TV but are encountering errors, it is possible your TV is outdated.

You can only run the app on a Samsung TV which is from 2015 or onwards. Any older smart TVs of any brand will not work prior to this either. This is due to the high level of technology required to run such a large app, that older TVs can not handle.

How to fix Funimation not working on Samsung

Photo by Branden Skeli on Unsplash

Now we’ve figured out the problem with your Funimation app, you may be wondering how to fix the issue at hand. First things first, we’d recommend power cycling your Samsung TV. In order to do this, you need to unplug your TV at the wall, hold the power button for 5 seconds, release this, then allow 1 minute before plugging it back in.

This reboots your TV and can be a useful fix in order to get Funimation working again.

However, if power cycling did not fix your issue, here are 4 simple fixes in order to get your Funimation back up and running.

Use a 3rd party device

If you have an outdated TV or are regularly having issues with the smart features on your TV, we’d recommend a streaming device is a great alternative. Some of the options that run Funimation are:
- Firestick
- Roku
- Chromecast
If you own one of these, you can simply plug it into your TV via the USB port. Then download the app from the app store.

Clear cache for Funimation

Clearing the cache for an app is important to keep it running as it should be. As the cache stores temporary data to allow websites, apps, and videos to load quicker in the future. It usually stores unnecessary data and can actually slow down a program as it takes up unneeded space.

Removing your cached data frequently can increase speed and remove any bugs which may be stopping the programming from running as it is supposed to.

To delete the cache on Funimation you need to do the following steps:
1. Tap the home button on your Samsung TV remote
2. Then head to settings followed by apps
3. Then choose System apps
4. Select ‘Funimation’ then choose clear cache.
5. Finally, tap OK.
If you’ve never deleted the cached data, this may take a few minutes to complete.

Uninstall and reinstall the app on Samsung TV

The next fix is to uninstall the app completely, then reinstall it. By removing the Funimation app from your Samsung Smart TV then reinstalling it, you will be running the latest version of the app. Which will remove any old bugs and stored settings, and allow the app to perform as it should.

In order to remove an app from your Samsung TV, please do the following:
1. Head on to the apps via your remote control
2. Next select options in the bottom right-hand corner
3. Scroll through the menu bar and select delete
4. Then choose the app you want to remove, in this case, it is Funimation
5. Allow this to be removed fully
Then to redownload the app, you need to head to the app store, then search for the app again and press download.

Reset your Samsung TV

The final fix for your Samsung TV is to reset it back to the original settings of the TV. Although this can be frustrating, having the TV run like a new device can be beneficial as it removes any existing data on it. But due to the fact it will remove everything on it, we’d recommend only doing this as a last resort.

To factory reset your Samsung TV you need to do the following:
1. Open your TV settings
2. Choose general from the menu
3. Then select reset, you will be asked for a password, the standard pin for Samsung is 0000
4. Once you’ve entered this you will be asked for confirmation again, then click OK.
5. Your TV will restart automatically, and when it loads again it will function as a new device.
You will need to redownload all of your apps, enter all of your network data and sign back into your accounts again.

Is Funimation only available on Samsung TVs?

Although previously, Funimation hasn’t been available on a lot of devices, primarily Samsung and Sony. It is now available on a range of Smart TVs such as LG as well as gaming consoles, and even mobiles.

You can watch Funimation on the following gaming consoles:
- PS3
- PS4
- PS5
- Xbox 360
- Xbox One
Conclusion

With this guide, we hope you have been successful in troubleshooting your Funimation not working on Samsung TV error.

If you are experiencing regular issues with your Smart TV apps, we’d recommend purchasing a 3rd party device in order to make your streaming experience run a lot smoother.

However, if you are still experiencing issues, you can reach out to Funimation via Twitter for further support.
March 13, 2022
Xbox Series X Won’t Upgrade Games: How To Fix Your Updates
If your Xbox Series X won’t upgrade your games, you may be trying with one that is not eligible to be upgraded, or, you are not logged in to the correct Xbox account.

Do you have a slow, unstable internet connection? This will not only prevent your Xbox Series X from downloading games but also interfere with the quality of gameplay on your console. Fortunately, a Wifi connection can be resolved with an amplifier or internet booster.

We have generated this straightforward guide to help you make sense of why your Xbox Series X won’t upgrade games, as well as provide you with four simple solutions you will be able to execute on your console so you can get back to playing games like Halo Infinite and Forza Horizon.

Why Won’t My Games Upgrade on Xbox Series X?

Why won’t Xbox Series X upgrade my games?

Your Xbox Series X won’t upgrade your games successfully if you have a download queue of multiple games pending on your console. You should only be upgrading your Xbox Series X games one at a time. If you select more than one to upgrade at the same time, your console will become overwhelmed, and the upgrade will be disrupted.

If you are only downloading one game on your Xbox and the upgrade won’t complete, it could be due to the following reasons;

1. Poor Internet Connection

Your Xbox Series X needs to be connected to a stable network connection that is stable. If it keeps disconnecting during an upgrade, your console will be unable to complete the download.

An internet speed of at least 25Mbps is recommended for gaming. This includes completing installs and downloads.

2. Xbox Series X Game not on Internal Disk

Xbox Series X won’t upgrade games if they are not on the internal storage of your console.

You cannot upgrade games if they are on an external drive.

3. Game Files Corrupted

If there is a specific game that is not upgrading on your Xbox Series X, this could be because their game files are corrupted.

This will stop the upgrade from being processed. In this case, you may find the upgrade will stop at a certain percentage followed by your Xbox Series X freezing or crashing.

4. Lack of Internal Storage Space

Do you have adequate internal storage space on your Xbox Series X?

Some games increase in size when they are upgraded due to added features and improvements. Your console will be unable to upgrade your games if there is not enough space to ithemtall it directly onto the disk drive.

5. Physical Copy of Xbox Game

Your Xbox Series X won’t upgrade games that is a physical copy of an Xbox One game. If you want to upgrade an Xbox One game but you have it in a disk version, you will need to purchase the digital copy.

You can buy a digital copy of a game via the Microsoft Store.

(Fun Fact; The Xbox logo is green because, at the time, designer Horace Luke, who created the logo for Xbox only had a green pen when).

How to Upgrade Xbox Series X Games

You can upgrade your games on Xbox Series X by making sure you do one at a time only instead of creating a queue of multiple games that you want to update. This will involve waiting for the game to be 100% upgraded before moving on to the next video application.

Additional fixes you can execute on your console to ensure your Xbox Series X updates your games include;

1. Refresh Internet Connection

Refresh your network to ensure your network connection is stable, and you are receiving adequate internet speeds.

Your Xbox Series X needs to continuously be connected to a strong Wifi network. This will prevent any interruptions during game upgrades.

Step 1. Unplug your Wifi router and wait a couple of minutes

Step 2. Re-Plug it back in and turn it back on

Wait for your Xbox to reconnect to your internet.

Tip, check your internet speed to ensure it is good enough to instigate your game upgrades. If you have an issue with your network service, you may need to invest in an internet booster.

2. Install Xbox Game onto Internal Storage

Your Xbox Series X will not be able to upgrade your games if they are stored on an external disk drive.

You will need to reinstall the game onto your console’s internal storage drive followed by requesting the upgrade.

Once the update has been completed, if you want to, you can move the game back onto your external drive.

3. Reinstall Xbox Series X Game

If the game file is corrupted, you will need to reinstall it to get rid of the faulty software, otherwise, you can try a power reset on your console.

To do this, simply;

Step 1. Switch your Xbox Off by pressing down on the main button

Step 2. Unplug your console for a couple of minutes

Step 3. Reconnect your device and turn it back on

Once your Xbox has reconnected, attempt to upgrade your game.

4. Free up Space on Xbox Series X

If you are lacking internal storage space on your Xbox, you will need to uninstall any games or applications that you do not use to create more memory for the upgrade to be successful.

Once you have uninstalled an application, restart your console to ensure all remaining data has been erased.

How to Boost Xbox Series X Download Speed

How to improve Xbox Series X internet

You can improve your Wifi speed by connecting an amplifier to your router. With a poor network connection being one of the main reasons why Xbox Series X won’t upgrade games successfully on your console, improving your internet connection at home will in return give your console a faster download speed.

What does a Wifi Amplifier do?

An amplifier will improve your Wifi’s signal strength and increase how much range your device receives.

Your Xbox Series X should receive at least 25Mbps for its download speed, however, this will increase if your console is sharing its network connection with other devices.

To play and upgrade games without any interruptions on your Xbox Series X, you should look at purchasing a Wifi amplifier.

How Will a Wifi Amplifier Improve My Xbox Series X Performance?

If you have a Wifi amplifier, your Xbox Series X performance will improve in multiple different ways;
- Faster loading times
- Improved image quality
- Decrease in latency issues
- Less audio issues
- No download/install problems
Not only this, but your overall internet connection within your household will improve. An amplifier will alleviate any throttling issues on your connection when you have multiple devices connected at the same time.

You can check out one of Amazon’s enhanced Wifi amplifiers here.

Why Won’t My Games Download on Xbox Series X?

Why Won’t My Games Download on Xbox Series X?

Your games will not download on your Xbox Series X if the cache files on your console have become too full, or corrupted software is included in these files. When the cache on your Xbox becomes too full, it will slow down the performance and can be the cause for your Microsoft software to crash.

Other reasons why Xbox Series X is not downloading games include;
- Xbox Live is down
- Not enough internal storage space
- Xbox system software needs to be updated
- The game is not compatible with your Series X edition
Tip, you can check to see if Xbox Live is down by checking the status here.

What Do You Do if Your Xbox Won’t Download Games?

How to fix Xbox Series X won’t download games

You can clear the cache files on your Xbox Series X to help fix your console from not downloading your games. This can be done by pressing down on the Xbox home button for roughly ten seconds to turn your console off. Turn it back on after a minute and a half. This will give your Xbox enough time to completely shut down.

Alternative methods to troubleshoot your Xbox Series X so it can get back to downloading your games successfully include;
- Free up space on your console
- Complete a system update
- Check if the game is compatible
Note, when you want to download or upgrade a game on your Xbox Series X, make sure you are logged in to the correct Xbox account from which you originally purchased the selected game.

Conclusion

With this easy to follow directory, we hope we have guided you to understand fully why your Xbox Series X won’t upgrade games, and that you were able to resolve this issue with one of the four simple solutions provided.

If you have continuous internet issues, we do suggest you take a look at purchasing an amplifier. It will not only improve how well your Xbox operates but improve the overall performance of your network connection for every Wifi connected device in your household.

For any other queries or concerns you may have, you can make use of the Xbox support page.

(Quiz Question; Who designed the Xbox logo? Write your answer in our online contact form, and submit it with your details).
March 12, 2022

More posts